Content of the consultation
Used for cutting power lines at high altitudes.
The client wanted to create a jig for mounting commercially available power tools.
Since it will be used for work at a height of 6-7 meters, strength is necessary,
They wanted the weight to be as light as possible.
This was a case where such conflicting conditions were present from the very beginning.
We also received requests to consolidate everything from design to manufacturing and assembly into a single point of contact.
The goal is to reduce the hassle caused by having multiple suppliers.
That was your underlying wish.
The difficult parts
Several conditions were at play.
First of all, disassembling the power tool itself is not allowed.
It is absolutely essential that the part can be attached to the jig in the condition it was purchased in.
There was also a requirement for insulation, stating that the cord used to turn on the switch should not conduct electricity.
The string itself was to be provided by the person in charge at the interview location,
The jig needed to be designed to meet those requirements.
moreover,
They also requested that the battery be slightly larger than the one provided, with some room to spare.
The reason was to make it easier to replace on-site.
The prototype was made to fit the provided tools.
During mass production, tools are procured through a different supply chain and used for assembly.
This was the planned course of action.
The drawing included several parts, such as height adjustment fittings and angle-adjustable end fittings.
Some parts are specified to be made of aluminum alloy (A5052).
There is a concern that the screw part "may crack."
It was even preserved as a handwritten note on the drawing.
The design required achieving both strength and lightness while adhering to precise dimensions and tolerances.
How was it resolved?
The process involved submitting design drawings, undergoing review and verification, and then producing one prototype.
Any changes will be reflected in the design, and after inspection and assembly, the product will be delivered.
We follow a process of confirming the requirements and then producing the necessary number of items.
The production is proceeding using sheet metal specifications.
The mounting mechanism is designed to be usable without disassembly.
The parts requiring insulation were designed to work in conjunction with the specifications of the cord.
The battery compartment is designed with ample space to facilitate easy replacement.
By making it possible to attach it from the outside without needing any tools,
We designed it so that it can accommodate changes in tool suppliers between the prototyping and mass production phases.
Finished
It can be attached to commercially available power tools without any modifications.
The sheet metal mounting jig is now complete.
While possessing the strength to withstand work at heights,
The specifications also meet requirements for ease of battery replacement and insulation.
Later, we also received a request from the same interviewee for guide parts for cable cutters.
This has led to an order for 40 units.











