PROJECT

Examples of product development and manufacturing

Restoring a mold from 30 years ago eliminates distortion defects in blade forming.

Content of the consultation

This is a consultation from a metalworking manufacturer that makes blades for slicers used for thin slicing.
This blade is a cymbal-shaped part,
It is made through a process of bending, drilling, heat treatment, and polishing.
This mold was made over 30 years ago, and if it broke, there was no replacement.

About two years ago, we had a new mold made separately, but we were having trouble producing the product.
After pressing with a hot iron, distortion occurred in the outer edge.
The product was in a condition that made it unusable.
There are only two companies, including the one I consulted, that can manufacture this type of blade.

From a crisis management perspective, we had two suppliers,
If the precision of the molds improves, there is a possibility that we will be entrusted with larger quantities.
We thought we could increase the proportion of orders we received.
Having only one mold currently presents a significant risk: if it breaks, it's all over.

The difficult parts

The newly made mold (SKD material) is made by heating the special steel material to 760 degrees.
The condition was that it would take 3 minutes to mold.
However, a molding defect occurred where the outer edge was wavy.
Two years had passed without a clear explanation for why the distortion was occurring.

The drawings were not organized,
While comparing the current mold, the new mold that produced defects, and the actual product sample,
We needed to start by verifying the phenomenon.

How was it resolved?

We received three samples: the current mold, a new mold that had produced a defect, and a product sample, and investigated the phenomenon.
Then, we create drawings to allow us to identify the cause.
The manufacturing process involves two companies: a mold maker and a metal processing manufacturer.
We have established a system in which three companies, including MACHICOCO, will proceed with this project.

Furthermore, we have confirmed that even newly manufactured molds that have produced defects can be reused after additional processing, rather than being discarded.

Finished

Due to confidentiality agreements, we cannot show you photos of the molds.
Similarly, sometimes only old molds remain, or newly made molds don't function properly.
If you have any of these concerns, please feel free to contact us.
Even if the drawings aren't organized, we can start by having you show us the actual product.

Please send us the exact details of what you want to create or what you want to fix.

Share

Facebook
Twitter
LinkedIn